EarthWise™ Biodegradable EPS Coolers & Shippers for Cold Chain Packaging

The first biodegradable expandable polystyrene (EPS) cooler tested for vaccine, pharmaceutical, and food shipments*

The no-compromise way to sustainable cold-chain packaging

The challenge with today’s temperature-controlled packaging is not the weight, the cost, or the capabilities. It is the composition of the materials. While standard EPS is recyclable and can be broken down and reused for new products, there are high costs connected with transporting the waste due to its volume-to-weight ratio.

Most discarded plastics end up in landfills. Microorganisms found in these landfills are the key to the biodegradation of TempAid expandable polystyrene resin. Thanks to this unique additive, you don’t have to alter your waste stream to be eco-friendly. In fact, you do not have to compromise at all.

This revolutionary grade of EPS interacts and biodegrades with the resin’s chemistry to break down the polystyrene at a molecular level, just like the anaerobic conditions found in biologically active landfills.

Reduce plastic waste in landfills & oceans

  • No change in cost from standard EPS solutions
  • No performance change from standard EPS solutions
  • No CFCs, PBBs, PBDEs, Cadmium, Lead, Mercury, Hexavalent Chromium
  • 100% change in product end of life

Lab-tested for shelf stability

Test results conducted under conditions that simulate both wetter and biologically active landfills showed biodegradation of 91.9% of the product over four years*; Long after standard EPS containers are generally used. And just like standard EPS, it has a wide performance temperature range ( -20ºF to 190ºF) and high strength. Use it with the EarthWise™ drain friendly gel packs to create validated solutions to assure end-to-end eco-friendly packaging.

EPS performance with biodegradable properties

Long the affordable standard for protective and insulative packaging, EPS is known for its low cost, superior insulation, lightweight, leak, and moisture resistance.

Sample items tested in our ISTA-certified thermal testing lab and from third-party laboratories indicate the product provides the superior properties and performance you love about conventional foam but with a new end-of-life alternative. In fact, our results have shown an improvement in performance over standard EPS in several testing scenarios.

ceab1e32c882c31524d086efdcc0b29cb

Applications

The TempAid Bio EPS is a welcome alternative for those customers demanding eco friendly cold chain packing and shipping options that are still affordable. These can be used as components or as part of a validation solution tested in our labs.

  • From vaccines to insulin, tissue to pharmaceuticals, when it comes to shipping perishables, count on TempAid Bio EPS insulated shippers to continue to meet the need for ambient, cold, and deep-freeze applications.
  • The emerging meal kit delivery market is a natural fit for these coolers, where millions of fresh or frozen meals reach consumers each year and which require an environmentally friendly disposal method.

Specifications

The TempAid EPS Bio is available as a stand alone solution or as a rugged qualified solution that includes the outer corrugate, EPP outer shell, EPS bio insulated cooler and 14 PCM gels. testing data and pack out diagrams are available upon request.

ModelsThe TempAid EPS Bio is available in over 20 sizes of coolers. Custom sizes are available for volume orders. Contact us for a list of sizes available.
RecyclableYes, using standard EPS recycling methods (where available)
Direct Food ContactThese products meet FDA 21 CFREU framework 1935/2004, and EU regulation 10/2011 requirements for direct food contact applications.
EarthWise EPS products are free from
  • CFCs (chlorofluorocarbons)
  • PBBs (polybrominated biphenyls)
  • PBDEs (polybrominated diphenyl ethers)
  • Cadmium (Cd)
  • Lead (Pb)
  • Mercury (Hg)
  • Hexavalent Chromium (CrVI)
Guidelines Met
  • European Directive 2002/95/EC for Waste Electrical and Electronic Equipment (also known as WEEE or RoHS – Restriction of Hazardous Substances
  • European Directive 94/62/EC for Packaging and Packaging Waste
  • EU Recovery Standards EN 13430 and EN 13431
  • CONEG (Coalition of Northeastern Governors)
  • CA Health & Safety Code sections 24214.11-24214.26 (aka “Toxics in Packaging Act”

* The resin used in these coolers biodegrade 92% over four years. They were tested using sample items under conditions simulating both wet and biologically-active landfills using the ASTM D5511 test. The extent of degradation and stated rate do not mean the product will continue to decompose. The data stated above has been provided in good faith and believed to be reliable, it does not constitute a part of our terms and conditions of sale unless specifically incorporated in our Order Acknowledgment.

Model/Part NumberVolume (L)Weight/Unit (lbs)Outer DimensionsInner Dimensions
RA1377130 1.330.138" x 6.5" x 5"6" x 4.25" x 3"
RA13770174.070.258.25” x 6.25” x 9.5”6.75” x 4.75” x 7.75”
RA13771474.080.3810.5” x 8.25” x 8.5”7.8" x 5.55" x 5.75"
RA13771526.370.9313.125" x 11.625" x 9.625"9.098" x 7.598" x 5.625"
RA13771386.5718.62” x 11.44” x 5.2”15.06” x 8.19” x 3.25”
RA1377092 HD7.641.2813.25” x 11.37” x 11.4”9.87” x 6.75” x 7”
RA1377092
7.641.0113.25" x 11.37" x 11.4"9.87” x 6.75” x 7”
RA13770259.721.0113.5” x 11.75” x 9.625”10.47” x 8.72” x 6.5”
RA137708811.1313.25” x 11.37” x 11.5”11.74” x 8.87” x 6.52”
RA137701111.610.6013.8” x 12” x 8”11.81” x 10” x 6”
RA1377050
13.051.0115" x 11.6" x 11.83"11.63" x 8.28" x 8.27"
RA137705113.051.0115" x 11.6" x 11.83"11.63" x 8.28" x 8.27"
RA1377071 HD17.281.4113.75” x 13.75” x 12.1875”10.75” x 10.75” x 9.125”
RA137707117.281.0813.75” x 13.75” x 12.1875”10.75” x 10.75” x 9.125”
RA137715018.641.7417.8125" x 15.875" x 10.9375"13.809" x 11.871" x 6.938"
RA137714124.810.9219.1875” x 13.625” x 11.75”16.1875” x 10.6875” x 8.75”
RA137710025.931.5018.12” x 13.34” x 15”14.47” x 9.61” x 11.38”
RA137715143.682.0523.15" x 15.2" x 14.2"20" x 12.05" x 11.06"
RA137701261.572.1219" x 19" x 15.7"17" x 17" x 13"
RA1377132
75.3128.6” x 20.5” x 13.4”25.6” x 17.6” x 10.2”
RA137713549.623.9222.12" x 16.9" x 20"17" x 11.875" x 15"
RA137707388.584.4726.375” x 20.5” x 20.375”22.5” x 15.5” x 15.5”
RA13771539.4111.88” x 11.88” x 11.43”8.34” x 8.34” x 8.26”
RA1377153HD 9.4111.88” x 11.88” x 11.43”8.34” x 8.34” x 8.26”

LOOKING FOR A CUSTOM PACKAGING SOLUTION?

YES, I'd like a copy of the testing report for the EPS Bio

    Please prove you are human by selecting the Car.